NanoStation M2 is a powerful all-in-one outdoor unit including 2 x 11 dBi antenna (MIMO) for the 2.4 GHz band. Unit allows real communication speeds up to 150 Mbps.Another advantage is, beside of high data transfer rates thanks to the use of 802.11n standard, time multiplex TDMA, which allows the unit in the AP mode connect more than 300 clients with low latency.Web administration is very simple and clear. You can set as:- AP mode, client or WDS- traffic shaping- QoS- between WAN and LAN routing and transparent bridge, with or without NAT NAT- antenna polarization (vertical / horizontal / adaptive)- disable or enable the output for an external antenna- signal strength, which correspond to the specific LED indicator- output power up to 27 dBiIn package is included a 24 V power supply and PoE injector, with the reset button which put device into TFTP firmware recovery mode. System Information : Processor Specs Atheros MIPS 24KC, 400MHz Memory Information 32MB SDRAM, 8MB Flash Networking Interface 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface Regulatory / Compliance information : Wireless Approvals FCC Part 15.247, IC RS210, CE RoHS Compliance YES Physical - Electrical - Environmental : Enclosure Size 29.4 cm x 8 cm x 3cm Weight 0.4kg Enclosure Characteristics Outdoor UV Stabalized Plastic Mounting Kit Pole Mounting Kit included Max Power Consumption 8 Watts Power Supply 15V, 0.8A surge portection integrated POE adapter included Power Method Passive Power over Ethernet (pairs 4,5+; 7,8 return) Operating Temperature -30C to +80C Operating Humidity 5 to 95% Condensing Shock and Vibration ETSI300-019-1.4 INTEGRATED 2x2 MIMO ANTENNA : Frequency Range 2.32-2.55 GHz Gain 10.4-11.2 dBi Polarization Dual Linear Cross-pol Isolation 23dB minimum Max VSWR 1.6:1 H-pol Beamwidth 55 deg. V-pol Beamwidth 53 deg. Elevation Beamwidth 27 deg.